To improve the processing speed of stone carving machines, it is necessary to understand the factors that affect the processing speed of stone carving machines, understand the working principle of stone carving machines, and then fundamentally solve the problem of slow processing speed of stone carving machines.
The main point to improve the speed of a stone carving machine is to determine a reasonable carving speed based on the hardness of the carving material and the performance of the stone carving tool. Of course, the stability and other performance of the stone carving machine itself should also be considered, and the machine should not be overloaded.
Each material's cutting tool has a maximum cutting amount. When using a stone carving machine for processing, we should try not to use the maximum cutting amount of the tool because this value is only a reference value for users and cannot exceed it. Therefore, in practical operation, it is best to be smaller than this value and control it at two-thirds of the value, which is very ideal. This way, the stone tool can be used for a long time and the tool life will be longer.
In addition, the processing of stone carving machines is divided into two parts: rough machining and fine machining. The overall speed and tool selection for the final rough machining should be faster and better, and all the excess should be cut off as much as possible to save time and improve work efficiency. In fine machining, the speed of the carving machine can be adjusted appropriately to ensure the precision of product processing.
