4 Axis CNC Stone Engraving Machine

4 Axis Cnc Stone Engraving Machine can be used for three-dimensional engraving of materials. The rotary shaft of one machine uses a thimble + chuck to fix the cylindrical workpiece with greater bearing capacity, more stable processing, higher precision and easier operation.

PVC Plexiglass two-color board Engineering plastic bakelite solid Wood jade aluminum alloy copper graphite circuit board processing Engraving high-quality rotary Axis 4 Axis Cnc Wood Engraving Machine One machine can complete the plane engraving three-dimensional engraving The rotating shaft uses the thimble + chuck to fix the bearing force of the cylindrical workpiece. The processing is more stable, the precision is higher and the operation is more convenient.

4 Axis Cnc Stone Engraving Machine can not only process round engraving, but also the following products.

We can also customize the equipment according to your needs

1. The machine can not be placed in a dark and humid place, nor exposed to strong light, and a well-ventilated place should be selected.

2. The machine must be regularly maintained, just like the regular maintenance of the car, to clean the screw, and drop lubricating oil on the track and rotating parts to ensure normal operation, improve work efficiency, and reduce unnecessary losses.

3. Check whether the control box and wiring are loose and connected incorrectly before work every day. Long-term operation depends on whether the wire sheath is damaged and whether there is leakage.

4. Do not frequently use one side of the machine, which will cause the lead screw and guide rail to not contact the beam for a long time, and can not get reasonable lubrication.

5. The machine is dusty when it works. You need to clean out the gaps and dead spots in the machine at least once a week.

6. Do not place substances that interfere with the work of the machine, such as debris, corrosive or magnetic substances, on the table.

1. Configure a voltage regulator, because the power consumption of the engraving machine is generally large, to ensure that the ground ground is grounded.

2. Computers connected to the machine and networked computers should be used separately, and regular CD-ROM software should be used to prevent viruses from attacking computers and machines and affecting normal work.

3. The continuous running time of the machine does not exceed 10 hours per day. When you use water cooling, you need to keep the cooling water clean and the pump working normally. Water spindle motor must not be short of water. The cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the tank can be replaced with antifreeze.

Hot Tags: 4 axis CNC stone engraving machine, China 4 axis CNC stone engraving machine manufacturers, suppliers, Fiber Laser Metal Marking Machine, cnc machine parts, 3D Engraving Machine, Servo Motor, M860H Stepper Motor Driver, CNC Cutting Machine