1. Spindle cooling water pump selection specifications in line with the principle of choosing large not small, you can refer to the original machine
equipped with the same specifications or large model specifications to buy, if not clear, please consult customer service order after.
2. Each spindle cooling water pump has been tested and delivered before leaving the factory, so there is a small amount of water in the pump, which is normally, if you mind, please don't.
spindle cooling water pump use precautions
When it is found that the pump power is insufficient or does not turn, the power supply should be cut off in time to remove and clean the suction shaft of the submersible pump rotor.
Do not let the submersible pump idling or out of the water for more than 5 minutes.
The submersible pump can only be used in fresh water or seawater, and cannot be used in corrosive liquids.
Do not use the power cord to lift the submersible pump directly, otherwise the power cord may be broken.
The submersible pump should be completely immersed in water when working to ensure that the submersible pump has a certain degree of cooling.
spindle cooling water pump application scope
Hot Tags: spindle cooling water pump, China spindle cooling water pump manufacturers, suppliers, cnc northern parts, cnc prototype parts, cnc north american parts, cnc southwest parts, cnc high speed parts, cnc exported parts
